PDA

View Full Version : Door sensor signal



contedel
06-14-2010, 07:57 AM
Hello everybody

Could anybody tell me what is the address (BTSS variables) of the door sensor signal at 840D?
I’d like to make an experiment with the door opened but I can’t detect the sensor.

Greetings

TobiasA
06-21-2010, 01:07 PM
Hello everybody

Could anybody tell me what is the address (BTSS variables) of the door sensor signal at 840D?
I’d like to make an experiment with the door opened but I can’t detect the sensor.

Greetings

Hello

Door switches are usually somewhere at a safe control unit or input. The machine manufacturer determines where exactly it is in the PLC.

Safety in a case of hardware and can’t be invalidated with help of software.

Regards, Tobi

contedel
06-22-2010, 12:52 AM
Hello

Door switches are usually somewhere at a safe control unit or input. The machine manufacturer determines where exactly it is in the PLC.

Safety in a case of hardware and can’t be invalidated with help of software.

Regards, Tobi

Thanks for the answer Tobi!

Greetings