PDA

View Full Version : Shopmill on 840D DMC635V



Conny911
06-17-2009, 07:47 AM
Hello guys

I’m making a programmed stop with M0 (embracing). Does anyone know a command that immediately unlocks the door?
It has to work under Shopmill on Deckel-Maho DMC635V

Thanks in advance
Conny911

uli12us
06-17-2009, 07:59 AM
In case of 63V with Siemens it’s M29. But it can be different on your machine. It stands in the guide for sure.

Conny911
06-17-2009, 10:18 AM
In case of 63V with Siemens it’s M29. But it can be different on your machine. It stands in the guide for sure.

Hello Uli12us

Unfortunately it doesn't work. I read through the documentation and didn’t manage to find anything. I’ll continue searching and wait for an answer from DMG

Greetings
Conny911