PDA

View Full Version : Waved dipping



Dorothea
08-19-2008, 03:40 PM
I got a new mono tool from BIG D20 with 3 cutters.
I’d like to mill with it in aluminum paths with test purpose.

It means I make a full flute, for example Z-2mm, dip in Z-12mm, dip out Z-2mm etc.

Whohas made anything like this and has an example program?

Do I have to use G64?

Thanks

trollrne
08-24-2008, 02:03 PM
Try that way:

N10 R10=50
N20 R11=-50
N30 R12=2
SCHLEIFE:
N40 G0 X0 Y0
N40 G0 Z=R10+R12
N50 G1 Z=R10
.....
.....
.....
N100 G0 Z=100
N110 R10=R10-2
N120 IF R10>R11 GOTOB SCHLEIFE
N130 M30

Regards