PDA

View Full Version : Line-by-line milling



0815fraeser
07-05-2010, 03:14 PM
Hello
How is it possible to mill a contour line-by-line? I have the Step file but what about the course of action?
I need to create a bevel that has radius R4 at the beginning and at the end. The machine is a 3-axial one.
Maybe someone can help me along

Bye for now
0815fraeser

echtdampfer
07-06-2010, 12:53 AM
Hi
If you send a drawing to me, I’ll quickly make an offset surface for you.
Regards, markus

hoang
07-06-2010, 03:44 AM
The whole bevel in 3D machining. Or if it’s too time-consuming, then split the bevel before rounding, mill the bevel normally, and rounding in 3D.
Greetings
HTN

echtdampfer
07-06-2010, 04:30 AM
Or make everything in offset-surface-job
It’s the easiest way
Regards, markus