View Full Version : New Machine Build Stats on my machine

05-08-2014, 08:19 PM
I am close to done with my machine. Here is what I have so far. I have a CRP2448 , Probotix 280 oz Stepper motors ( running Bipolar parallel ) and Probotix 4.2a Mondo drivers (Wantai DQ542MA). and a probotix bob. Running Mach3 and 2010 screenset ( which I have not set up yet ).

In Mach3 these are my settings. 45000 Hz :
Steps Vel Accel G force Step pulse Dir pulse
X and A axis 1552.509804 900 30 .0777065 1 0 X axis moves at 900 units
Y Axis 1531.249236 799.8 30 .0777065 1 0 Y axis moves at 800 units
Z Axis 800 300 30 .0777065 1 0 Z axis moves at 300 units

I am running 3.7 amps and 800 microsteps on , the drivers.

The people at Cncrouterparts (www.cncrouterparts.com) and Probotix (www.probotix.com) have been very tolerant and patient with me. They have both helped me alot. Thank you. No one can go wrong working
with these companies. A big thank you to Gerry Mach3 2010 Screenset The CNC Woodworker - Mach3 2010 (http://home.comcast.net/~cncwoodworker/2010.html)

Anyone have any suggestion as to what I may need to do to improve my setup. I am a newbe I tried to get things to line up and I gave up . LOL