PDA

View Full Version : VCarve Pro and PhotoVcarve



CRFultz
06-27-2006, 05:54 AM
VCarve Pro allows for the import of PhotoVcarve projects so you can position the image anywhere onto the material and add text and graphics.
-
This is a simple layout of my new Harley Davidson 2006 Low Rider.
Depth of cut was about .03 using a .062 60 degree cutter.
Cut time was about 40 mins at 25ipm.
Combining the two pieces of software opens up all kind of creative possibilities which I haven't even begun to dabble with. This software package and Mach 3 is enough to keep me busy for a long time. :)
-
The wood was 1/2 inch Maple, I put on two coats of Minwax poly before the cut and applied Jacobean stain after the cut and then wiped it off.
Chuck

Dman
06-27-2006, 11:32 AM
Very nice work Chuck! What is the overall size of the picture? The new Vcarve Pro along with PhotoVcarve and Vector Art 3D machinist are an awesome set of tools to work with. Keep up the super work!
Damian

Tony Mac
06-28-2006, 01:52 PM
Nice Bike Chuck and nice carving!

A note for anyone watching this thread, Chuck has been Beta Testing VCarve Pro for us and the customer release is planned for the end of this week.

Tony Mac