PDA

View Full Version : Need Help! Inverse kinematic / 4+5 axis



MarcusWolschon
03-30-2014, 04:06 PM
Is anyone else interested in coding inverse kinematic and collision testing for post processing G-code to make proper use of a 4th and 5th axis?

kadircanik
05-16-2014, 08:38 PM
Which CAM system you are using?

MarcusWolschon
05-17-2014, 01:34 AM
" interested in coding "
=> writing my own CAM.
Also very slowly writing code to integrate this into the CAM module for FreeCAD.