PDA

View Full Version : MAHO Information



Bearing
06-11-2006, 07:04 PM
Hi everybody, I just joined the forum. I was pretty stoked to see a section that included MAHO products. I have been a machinist for 6 years now and about a month ago at work they told me I was gonna be a "Maho guy".

So I only run MAHO machines now, we have three 1000Cs and one 700H.
I really like the way the control works but the MAHOs (at least the ones at our place) can be very tempemental. Most times the maintenance guys are at a loss trying to diagnose a problem and I end up wiping down my toolbox waiting to keep runnin.

Is there a source for info on these mills? A book perhaps?

CUTRITE
08-16-2006, 04:55 PM
Bearing,

Hi I ran maho 900c,700c,1000e a total of 18 years.
You are right very tempemental.They used to have a really good service guy.
And excellent phone trouble shooting.They use to walk a maint guy thru it.

rezafilth
09-18-2006, 03:42 PM
hi
I need an english manual for maho 700c
thanks a lot.

maramb
09-26-2006, 05:12 PM
maybe you can find something here

http://www.gildemeister.com/home,de

Maho (DMG) is the best machine I ever worked with

CUTRITE
10-13-2006, 02:42 PM
Hi,

I do not have English manuals available to me now.