PDA

View Full Version : Prova thc with leafboy77 driver boarding



designmicke
02-23-2014, 04:31 AM
Has anyone got the leafboy driverboard to work with thc and mach3 software? I have a proma thc installed but the thc ctrl does not work. The i/o signals up/ down fr.o.m. The thc is coming in correctly, but the ctrl does not work.
Appreciate all help i can get!
Thanks

serenissimatech
12-14-2015, 10:33 AM
Hi.
I have the same problem with mine.
There is anybody with a updated controller for this?
As for the slave axis, I connected both servo together, since they are servos i hope they not give me big problems.