PDA

View Full Version : Posts needed anilam 6000 mill



rbever36
06-01-2006, 05:32 PM
I need a good Post for a Kent CNC Machining Center with an Anilam 6000 control for Surfcam Velocity. My local dealer will work with me to modify our post, But I hate trial and error.

Thanks

suzuki 1988
09-27-2007, 01:51 PM
did you got the post???

rbever36
09-28-2007, 04:49 PM
I have a post from my dealer, But it still needs to have a lot of bugs fixed. Hoping someone has one allready working well.

tnik
10-01-2007, 07:07 AM
if its a MPost, if you post your problems with it, I'm sure someone here might be able to point you in the right direction..

moneyhsk
04-08-2009, 02:41 PM
We are running a Fryer MC-45 with the Anilam 6000 controller, The post I have works great for us, if you want I can send it to you and you can test it out for your needs. Send me your e-mail address.


Ahh Heck, that was 2 years ago, if you don't have it figured out by now, somethings wrong, lol.

Jimy
10-13-2012, 10:19 AM
I just bought a fryer mc-40 mill with a anilam 5300 control and I am in need a post for surfcam 4.0. If someone has a post that would work or knows how I could get one I would greatly appreciate it.