View Full Version : hyudai kia turret has lost tool position memory

11-14-2013, 12:34 AM
battery went out so I changed and still had al-67 turret alarm so I manually pressed servo-release and rotated turret to home(tool1) . powered down and back on now no alarms but I call up tool 11 and tool 6 comes up. It has lost tool position memory. please help

11-29-2013, 04:40 PM
Does it have PMM? If yes, set the turret to pos. 1, PMM parameter 11#0 to 0 to 1, power off/on.