PDA

View Full Version : New Comment from OMNI Customer



omnicnc
03-18-2013, 04:23 AM
Dear omnicnc,


sly666 has just replied to a thread you have subscribed to entitled - Anyone bought from Jinan Omni? -


Here is the message that has just been posted:

So after a long wait for the cnc wood router (http://www.omni-cnc.com) machine to arrive, i finally have it set up and running in my garage.


Build quality is very good, much better than i was expecting from a Chinese machine to be honest. Not the same build quality of a European or American machine but pretty good considering the price difference.

The machine is very heavy and took four of us to lift it into place.


After two weeks of use the machine is working flawlessly with all axis operating smoothly.

They even provided a config file for Mach3 containing all the correct settings for the machine.


I would recommend Omni.

Thanks

Simon

This customer bought OR1212 CNC router (http://www.omni-cnc.com/products/CNC_Wood_Router/OR1212_CNC_wood_router.html).

CNC professiona
03-18-2013, 08:30 AM
ohh, good advertising