PDA

View Full Version : Custom Cutter Profiles?



declanhalpin
03-09-2013, 08:25 AM
Hi all,

We rarely use standard flat or ball end mills. Generally, they are more similar to curved router bits. Can I create my own cutter library?

dh

declanhalpin
03-11-2013, 07:38 PM
*bump*

Seems like it should be do-able....

svenakela
03-12-2013, 08:07 AM
It isn't at the moment. You have to define the cutters in the cutters dialog.

Dan B
03-19-2013, 05:33 AM
Joakim had mentioned that he intends to add the ability to define your own cutter shapes. He mentioned this quite a while ago, but I would think it's still on his "to do" list. I would expect to see it eventually.

Dan