PDA

View Full Version : Traub CSK 300 VMC Fanuc 0m 1996



CNCkris
12-13-2012, 05:29 PM
Hi guys, I know that this is a long shot, but I`m looking for any information on this machine.
My customer bought it at auction some 8 months ago and it has never run and there is zero documentation.
The problem is when the machine is powered up you can reference X,Y,Z and it displays a message " magazine needs reference return ".
Even if I rotate the magazine 1 complete revolution, it sees the pot 1 proximity switch ( input 4.3 ) and all other switches correctly, position counters are counting correctly, but still the message is displayed.

I`ve spent 2 hours on the phone to Traub in Germany today and they have given up as they have no information on this machine ( 99.9% of them have Mitsubishi control )

Does anyone have one of these machines, or any info ?

Thanks in advance