PDA

View Full Version : Balsfulland CNC 1000 (Kammann)



ZhenCNC
11-28-2012, 03:50 AM
Hi. I need Help.! We have Balstfulland (Kammann) CNC 1000 with BOSCH CNC-1000 controler with 4 axes.

I need some information about machine status 8 and over message error.

Thank you!

esmondperry
03-08-2013, 03:54 AM
Balsfulland CNC 1000 (Kammann)
Yes, you can find this answer...
The machine status 8 is based on the laser machine controller command...
And you can get it at the needham-laser UK