View Full Version : Need Help! wire edm 4-axis

10-24-2012, 10:37 PM
i currently new on the Esprit software. Any 1 can tell me how to use it to do 4-axis using machine Mitsubishi ?

First i do is do the chain than after than when i choose for draft feature is a separate profile. When i choose for 4-axis contouring the profile coming out is top and bottom will be same.

10-26-2012, 11:39 AM
You need at least one line syncing the top and bottom profiles. Just put a 3D line at the beginning of both attaching them.