PDA

View Full Version : Hyundai-Kia VX400 Auto power off



BrendanS
10-20-2012, 11:23 AM
So I am having an issue using my Auto power off on my VX400. It has the Fanuc 0i control. On my other machines which are not huyndai's I just push the Auto Shutdown button and when the machine reads the "M30" code in my program it just shuts down. But that does not seem to work on the VX400. Please help if you have any type of insight on this. Thank you in advance for any type of help.

khaot183
11-06-2012, 05:24 AM
Hi,


did you install the option afterwards? if not please check if there is a wire in Y5.0 at the i/o boards. if yes you have it

do you know how to read the PMC? then i could tell you some adresses to check

also you should check the D Data 108 bit 4
move to system at keyboard -> softkeys to pmc->pmcprm->status
and in this status screen you should search for D108.4. if this is 0 it should be switched to 1