PDA

View Full Version : File/Save as seperate



daking
01-14-2006, 02:19 PM
Scott,

I'm trying to use File/save as seperate to breakup a large backup file. So far have had no success. The file is from a Fadal CNC 88HS downloaded using Fadal Assist. The output looks like this:
%
n1o1(part # op#
n2t1m6
.
.
M2
n102(***
.
.
m2
n1o2000(***
.
.
m2
%

are the n words in front of the o word a problem?
maybe the (program description?
any ideas?
Thanks,

Dave

MetLHead
01-14-2006, 05:47 PM
Dave,

Yes, NCPlot is looking for the program ID in Fanuc format. The O word must be the first character on the line:

%
O1234(PROGRAM1)
G1X...
...
..
M2

O2345(PROGRAM2)
G1X..
...
..
M2
%


Is the N word always the same when it appears in front of the O word? If so, you could do a search/replace to remove it before using the Save as Separate tool.


Regards,
Scott

daking
01-14-2006, 07:40 PM
Worked great

Thanks,

Dave

MetLHead
01-14-2006, 08:41 PM
Worked great

Thanks,

Dave

Cool, glad I could help. :banana:

Scott