PDA

View Full Version : Adding a Joystick.



on7tim7
01-10-2006, 02:33 PM
I am new with Mach3. I am adding a joystick to the system. This joystick has only one button and the stick. I wanted to control primarily the X and Y axis with the stick and with the button pushed use the vertical positions for the Z axis, the horizontal left to control the spindle on/off and with the horizontal right the Start on the program. So I can get the 5 functions with the stick and the only button it has. The control of the X and Y axis I already have it. Only problem here is that I don't know how I can implement the other functions with the button pushed. Please help. Thanks.