PDA

View Full Version : Need Help! Mach 3 Software Settings



tjclarkjr
09-02-2012, 09:23 PM
Can anyone tell me where the control is in Mach 3 to cut exactly like the file is displayed in mach 3. Now when I cut the image is opposite or face down when it is finished cutting. I would like to find a way for the machine to cut exactly how I see the image on the screen. Any ideas?? Thanks.

ger21
09-02-2012, 09:45 PM
You have one or more axis setup backwards. If it's upside down, the Y axis is backwards. If it's flipped L to R, then the X is backwards. Sounds like you might have both backwards.