PDA

View Full Version : CNC Router Problem



omnicnc
07-06-2012, 03:08 AM
Some cnc wood router customers find some problems in the process of operation cnc wood router. One of problems is uneven engraving. The reason could be following:
1. Stepper motor of cnc wood router (http://www.omni-cnc.com)
2. driving motor or currency segmenent setting is different with software setting
3. motor wire on Z
3. spindle motor
4. inverter being interupted, or value setting
5. static on cnc wood router
6. PC virus or PC system.
You may also call us or email us (sales@omni-cnc.com) for help.