PDA

View Full Version : CNC Wood Router Operation Tips



omnicnc
05-25-2012, 04:34 AM
CNC Wood Router Operation Tips
The CNC wood router is very sharp. In order to avoid the injury, do not touch the CNC wood router head with hands while operating.
Do not insert and pull out the serial cable linked with the computer with electricity.
Do not insert and pull out the serial cable of the control box with electricity.
In order to ensure safety and prevent interfering, the shell of the computer and the CNC wood router (http://www.omni-cnc.com) should be connected to the earth wire.
Please turn off the power in time when the cnc wood router machine does not work..
Please pull out the plug if the cnc wood router machine does not work for a long time.
The life-span of main shaft motor bearings is inversely proportional to its rotational speed.