PDA

View Full Version : ProtoTRAK Plus programming manual



JohnT-cen
03-22-2012, 09:20 AM
I hope someone can help me. I need to find a manual for a ProtoTRAK Plus. Its been over 15 years since I used one. I tried Southwestern Ind. could not find one there.

thanks

Kevin45
04-10-2012, 10:32 AM
Which manual are you looking for and are you wanting to pay or a freebie. Southwestern has all three manuals for $43. Southwestern Industries ProtoTrak Plus Manual - UManuals (http://www.umanuals.com/southwestern-industries-prototrak-plus-instruction-programming-care-manual.html)

If you are looking for just a programming manual, you can download a manual for a 2 axis or 3 axis from their site. It may not be specifically for the PLUS but their manuals are basically all the same. Here is a Programming Manual for the EDGE which is 2 axis. prototrak_edge_training.pdf - Preview ebook on PDFTop.net (http://pdftop.net/preview/YToyOntpOjA7czo3NzoiaHR0cDovL2NvZXN0dWRlbnRzaG9wLmVuZ3Iud2lzYy5lZHUvdHJhaW5pbmcvZG9jcy9wcm90b3RyYWtfZWRnZV90cmFpbmluZy5wZGYiO2k6MTtzOjEyOiJJbnRyb2R1Y3Rpb24iO30=)

Xuron
06-19-2018, 10:42 AM
Here is a link to the ProtoTRAK Plus Manual.
https://www.dropbox.com/s/2evbiq0igimsb96/Manual%20ProtoTRAK%20Plus.pdf?dl=0

Here is a link to a ProtoTRAK Plus folder with other manuals and some programming sheets to use.
https://www.dropbox.com/sh/26r0c8fth5knsjt/AABmm8OxLOd0XOsI2977YO02a?dl=0