PDA

View Full Version : Need Help! CNC 432 "S04" error and need Indramat TRK6 document



vax
02-20-2012, 04:14 AM
Hi,

I have one problem on my MH600C milling CNC machine (with CNC432).

My spindle turn well and after some time, (from 1 to 45 minute) the spindle stop and I have a "SO4" message error on my screen.

I cleaned the carbon brushes of the spindle motor and tachometer, but that does not change.
I think it comes from the speed controller, but I have that documentation only in German ...

If anyone has had the problem I'm listening.
If someone have this documentation in English or French I would be interrested in a copy.

Thanks by advance

cncboy1
02-25-2012, 01:23 PM
Please send me the German, i will translate it

vax
02-25-2012, 01:52 PM
Hi Cncboy1,

You are very nice to propose that but the documentation is a few big...

You can upload the pdf file here : Indramat TRK6 german file (http://dl.free.fr/apaiEwS4T)


Many thanks by advance

cncboy1
02-26-2012, 11:04 AM
Hi Cncboy1,

You are very nice to propose that but the documentation is a few big...

You can upload the pdf file here : Indramat TRK6 german file (http://dl.free.fr/apaiEwS4T)


Many thanks by advance

Sorry, that's a upload, i d'nt understand Fr.
We can write it in Eng. Germ or Netherlands (Ollanda???)

Sorry

vax
02-26-2012, 03:10 PM
If you can translate in english it will be perfect to me.

Many many thanks by advance.

Davey Boy
04-24-2012, 10:36 AM
I don't know if you ever found a solution to your "S04" problem. I bought an MH600 and the manual for it shows that error as "alarm overflow error" for the spindle.

I can try to find out more information if you need it.

All the best,
Davey Boy.

vax
04-25-2012, 11:02 AM
Hi Davey Boy.
Many thanks for your response.
If you can have some explanations, I'm interested.