PDA

View Full Version : RFQ Easy job



precisionhone
01-29-2012, 11:03 PM
Hi Guys, Looking for a RFQ. I will usually order in lots of 10 to 20 pieces.
Material 2.5 OD X 1.250 ID X 8" long tubing 1018 or 1045 CD
8" OAL +/- .010
2.5" OD can be bar stock size +.100 /- .050
1.250" ID bored or stock size no finish call out + .005 /- .010 I would prefer this ID be con with the 1.460 ID pocket
1.460 ID pocket on 1 end by 1.300 long both dim +/- .010 64mu finish with a sharp corner.
break the edges on the ID with a 45
These can ship 6 per flat rate box by the USPS.
Thanks

jerryt
01-30-2012, 05:13 PM
PM sent

IHscout
01-31-2012, 05:09 PM
Can you send a drawing to csfabworks@gmail.com.

mweaver
02-01-2012, 08:49 AM
Can you send drawing to mweaver71@yahoo.com?

Thank You

brad1
02-03-2012, 07:59 PM
can u send a drawing to money04@cox.net thank you for your time

brad1
02-05-2012, 03:22 PM
have u sent any drawing out like to see a drawing thanks

ChrisW
02-26-2012, 10:20 PM
Is this still open
please send drawings to chrisrktech@gmail.com
Thank you