PDA

View Full Version : RFQ: 6 pcs, lathe work



patriqq
01-14-2012, 11:40 AM
I need 6 pcs of the attached in annealed W1, which I (or you) can supply (McMaster Carr). ±0.25mm. STP, IGES etc available on request. Thanks

cncspec.com
01-22-2012, 11:28 PM
Hi,

Is the job still open? Thanks!

Sam
cncspec.com

patriqq
01-23-2012, 06:48 AM
Yes it is open until Wed 1/25 thanks

cncspec.com
01-23-2012, 09:27 AM
PM sent!

Sam
Cncspec.com