PDA

View Full Version : RFQ, custom muzzle brake, 10 pieces.



fslflint
01-11-2012, 08:58 PM
I have designed and prototyped a muzzle brake. the design worked flawlessly. when I proto'd it I used a manual lathe, a cnc mill with a dividing head and wire EDM. although it can be made many ways.

I would like quotes for an initial run of 10 pieces made of 4140 chromoly steel. subsequent runs are a possibility, and in varying materials.

I can email a model if you are interested in quoting this job.

thank you
Zach Thull

bravogifts
01-12-2012, 12:38 AM
Hi Zach,

We're interested in your project.

Please send your drawings to hugo@wizmetal.com

Thanks,
Hugo

D3Spindles
01-12-2012, 04:15 PM
We are interested... swilliams@dynomaxinc.com

fslflint
01-13-2012, 08:38 AM
Replied to all PM's and replies.

cncspec.com
01-22-2012, 11:32 PM
Hi,

Is the job still open?

Thanks,

Sam
Cncspec.com

:wave: