PDA

View Full Version : Wire EDM work



rkappius
11-27-2011, 11:15 AM
I need an assembly machined out of heat treated S-7 tool steel using wire EDM. The assembly is under 70mm in total diameter. One assembly consists of one outer ring, one inner ring, and 8 connecting pawls. Assembly is 7.5mm thick.

I have CAD files for all components and can provide engineering drawings with tolerances.

Initial run would be 6-10 assemblies, with 100 assembles as a second order if all goes well.

Thanks,
Rus

azmachining
11-27-2011, 01:01 PM
I thought you already found someone to make these? What happened?

edmman1
11-30-2011, 11:31 AM
If you still need a quote send cad files to edmwire@verizon.net

fubart
12-02-2011, 06:56 PM
Jason.trusty@us.interplex.com

We can get that together for ya. Send me the info.
sent from EVO 3D mobile