View Full Version : RFQ: Small Aluminum parts

11-14-2011, 02:33 AM
Just submitted 17 parts to FirstCut.com. They are probably going to be very expensive.

There are actually 18 parts, one is turned, which they can't do.

CNC Mill
CNC Lathe
Debur/Bead-blast/Tumbler deburring (almost any approach will work for these parts)
Laser marking

Work directly from SolidWorks files (I hate doing prints unless I absolutely have to).

Tolerances are not tight.

Several of the parts consist of drilling and tapping flat stock after cutting to size/shape.

One of the parts is a 16 inch long picatinny rail profile with a few holes drilled/tapped. No recoil slots.

There are a couple of parts that have a little more machining work.

One round steel shaft (drill stock) cut to length, grooved for a retaining ring, chamfered and one flat cut for setscrew.

Another round part starts as a 1 inch nominal aluminum rod, cut to 6 in length, drill-tap both ends, chamfer.

The point is that all the parts are pretty simple.

I need to prototype this design and then look into making a small run (10 to 25 sets). Following that we'd be looking at 100 to 1,000 sets at a time. Not sure yet.

PM if interested.

11-14-2011, 01:35 PM
Please send SolidWorks files to briscoe_machining@hotmail.com



11-14-2011, 03:04 PM
Could you please send me the files to look at (adam@moderncnc.com).

11-15-2011, 12:31 AM
we be interested in quoting this package to.


pete from TN
11-15-2011, 09:45 AM
PM sent...peace


11-15-2011, 11:46 AM
Please send solidworks files to jerryt@askogroup.com

11-15-2011, 07:10 PM
Thanks for all the replies (except for the clueless Chinese dude).
Sending files to those interested.

11-15-2011, 07:26 PM
Can someone really be this clueless?

We Tengzhou Good CNC Machine Co., Ltd. has been a professional supplier and manufacturer cnc machine from China,Products: mini CNC DIY CNC Low cost CNC Small CNC Desktop CNC Milling CNC Benctop CNC CNC Machine Machine tool CNC machining CNC milling Conventional milling Universal milling CNC machine CNC mchine center,keen type machine, CNC machine, CNC Machine Tools, DIY CNC VMC Series milling machine.If you have any needs, just feel free to contact us by eddiecnc(at)163;com goodmc1(at)good-mc.com TEL00866325555900 FAX00866325658466 MOB008618266092311 or shuimuxin@hotmail.com goodmc1@good-mc.com

11-17-2011, 04:01 AM
Please send me the files if you have not already been satisfied with the prices you are being quoted.

11-17-2011, 08:00 AM
PM Sent. Thanks

11-17-2011, 01:39 PM
Please send SolidWorks files to: brian.lee@wilsontool.com

We would be interested in quoting this.


11-17-2011, 07:07 PM

Can someone really be this clueless?