PDA

View Full Version : flat stock with keyseat



bg_blea
11-13-2011, 03:04 PM
Material: aluminum 6061 or comparable
Stock: 1" width .5" thick
Critical dimensions are in red.

I need 6 pieces of 34.5" long or 12 pieces of 17.25".
Prior to commiting to the above I require a 12" sample.

Send me 2 quotes: one for the sample and one for the others.
Thanks.

pete from TN
11-13-2011, 04:51 PM
What are the tolerances on this? I can probably machine these for you if you are not needing NASA precision. Will you be providing the material or do we source it? Thanks and peace

Pete

bg_blea
11-13-2011, 05:55 PM
Please quote with your material. Online metals has very good prices.
NASA tolerances, lol. I like that. Do you know what they usually are?

I need to press fit something in that slot so: best you can for the keyseat. A key cutter or a bit in good shape should do.

I can adjust for the other dimensions.

Once I get the sample we'll go from there.

pete from TN
11-13-2011, 06:02 PM
NT

mike1993
11-17-2011, 07:51 AM
PM sent. Thanks

bg_blea
11-17-2011, 08:12 AM
Thank you for your time.