View Full Version : Simple sign...

10-27-2011, 05:22 AM

Thought I'd post something here as there's not much action in the sign forums. :)

One simple sign cut for my son's door.

This was an old scrap of MDF that was over-size by 1mm due to having had some moisture on it at some point. It came up really fluffy when cut, no surprises there...

I decided to spray-bomb it blue anyway, then hand painted the white and sanded the top surface with a hard sanding block to sharpen up the letters.

I kinda like the grungy look of it, and for my first v-carved object I'm happy. :)

I've read quite a few of Joe's posts on here and eyeing up the sand blasting idea for a farm name sign for a neighbor... Watch this space. :)