PDA

View Full Version : Alum Spacers



IHscout
08-10-2011, 10:36 AM
I need a quote for machining spacers. The material is 6061. Please quote 500 pieces and 1000 pieces. With shipping to 63077.

The spacer measures 1.9 x 2.0 x .180

Tolerances: 1.9 +.005/-.010
2.0 (Factory extruded finish is exceptable)
.180 +.005/-.005
.030 +.005/-.005
.500 +.020/-.020

The finish can have tool marks left in them.

Any questions please e-mail to csfabworks@gmail.com

skippyfix
08-10-2011, 11:15 AM
message sent

Matt@RFR
08-10-2011, 01:46 PM
Does the .180" thickness need to be machined on both sides? If machining only one side is ok, which side?

IHscout
08-10-2011, 01:57 PM
Yes they need to be machined on each side.

dstryr
08-10-2011, 02:23 PM
Email sent.

Thanks

Dennis Rathi
Creations Unlimited
Creations Unlimited (http://www.creationsultd.com)

IHscout
08-20-2011, 08:55 PM
Thanks for all the quotes. The job has been awarded.