PDA

View Full Version : Miyano JNC 60 electic manual w/fanuc OTA



mmxmb
07-31-2011, 01:58 PM
Hi, Looking for a electrical manual for Miyano JNC 60 with fanuc OTa control. Any help will be appreciated.
Mike

zoik4you
05-26-2012, 09:08 PM
Hi, Looking for a electrical manual for Miyano JNC 60 with fanuc OTa control. Any help will be appreciated.
Mike

did u get it still?

zoik4you
05-26-2012, 09:09 PM
Hi, Looking for a electrical manual for Miyano JNC 60 with fanuc OTa control. Any help will be appreciated.
Mike

did u get it still?

CNC_Chicago
12-14-2014, 01:00 AM
Hey guys I have a Miyano JNC 60 with a FANUC OTA control.
I have turned on my machine and can run the machine in Jog mode.
As soon as I try to run the Spindle in MDI mode the machine gives an alarm.
I am sure its an interlock. I cant figure it out as I have no ladder diagram for this machine.
Can someone please help with the ladder diagram for this machine which shall help me clear up
any interlocks. Thanking you in advance.

zoik4you
12-14-2014, 01:08 AM
i can email you the ladder and EC if u ra will to bare the cost of scanning the books

this machine will not display the msg on the screen the type of alarm should be determined through diagnostics

CNC_Chicago
12-15-2014, 07:14 AM
I am willing to bare the cost for you to scan and send me the ladder/electrical diagram for the machine.
Please let me know what you want to charge and how do you want me to pay you.