PDA

View Full Version : RFQ: custom shock bushings



92se-r
07-28-2011, 04:24 AM
I'm looking for something like this

http://www.drowsports.com/images/prodimg/full-559.jpg

the stepped diameter is 15.85mm

the smaller diameter is 12.7mm <--- this end goes into a du bushing so needs to have a fairly tight tolerance.

length is 11mm.

the hole in the middle needs to be 6mm, but i want to offset it off center by 3mm.

I'm located in San diego. Thanks.

azmachining
07-28-2011, 04:13 PM
Quantity?

92se-r
07-28-2011, 05:19 PM
About 4 for now, more if it works well. Aluminum. Thanks.

dstryr
07-28-2011, 07:53 PM
PM sent