PDA

View Full Version : I can read my GCODE into MACH2 :(



Seventeen
09-17-2005, 08:57 AM
Hi,

I've made a GCODE buy this super software ==> Imagde To GCode
This GCODE is good and run in my CNC SIMULATOR software ! (it's a Harley Davisdon's LOGO)

But It's don't work in MACH2, i see a cube ! :frown: :confused:

http://img355.imageshack.us/my.php?image=capture26oe.jpg

Can you help me please ?

ps: I use the 6.11L version and i use a PICSTEP V4.0

Thanks

Cyril

Merci les copains !

Bloy2004
09-17-2005, 10:11 AM
If you can, try installing Mach3 if only just for testing..It has an "error" reporting feature that shows when there is something out of the ordinary in the G-codes and suggests what needs to be done.
Otherwise, just like me, just keep clicking buttons and try to record how you fixed it...:)

Barker806
09-17-2005, 10:30 AM
Do you have a registerd version of mach2? If you do not have a license file it will only run 1000 lines....
Just thinking I should put that out there...

Brian

Seventeen
09-17-2005, 10:49 AM
Thanks Barker to your reply !

Yes mach2 are registred (i've buy in ebay.com)
I've try to mach3 .......... no error, but always the problem........ :(

You can download my Harley Davidson's GCODE in attached files

And please tell me if it's OK on your software .....

THANKS

Merci infiniment !

Cyril

Seventeen
09-17-2005, 11:19 AM
This is the mach2 report:

Sat - 17:17:56 ---Program Startup
Sat - 17:17:56 ---Demo Mode 25Khz.
Sat - 17:18:04 ---interpreter: cutter radius compensation off

I've install the demo version, but no change :( :'(

Cyril

Merci encore une fois

Barker806
09-17-2005, 11:52 AM
Try this file, it seems to work here.

Seventeen
09-17-2005, 12:09 PM
Thanks Barker for you file, but your right it's Similar
The same problem .......

This is not normal ....

Cyril

ger21
09-17-2005, 02:05 PM
Could you post the first hundred or so lines of code?

Seventeen
09-17-2005, 02:23 PM
Ger21, this is first 100 lign of code (harley davidson's logo)
You can download complet GCODE in attached file (previous message)

Thanks for your help

Merci Ger21

G90 G80 G40 M3
G92 X0 Y0 Z0
G01 F140
G00 Z0.020000
G00 X0.230000 Y1.710000
G01 Z0.000000
G01 X0.230000 Y1.710000 Z0.000000
G01 X0.230000 Y1.720000 Z0.000000
G01 X0.230000 Y1.730000 Z0.000000
G01 X0.230000 Y1.740000 Z0.000000
G01 X0.230000 Y1.750000 Z0.000000
G01 X0.230000 Y1.760000 Z0.000000
G01 X0.230000 Y1.770000 Z0.000000
G01 X0.230000 Y1.780000 Z0.000000
G01 X0.230000 Y1.790000 Z0.000000
G01 X0.230000 Y1.800000 Z0.000000
G01 X0.230000 Y1.810000 Z0.000000
G01 X0.230000 Y1.820000 Z0.000000
G01 X0.230000 Y1.830000 Z0.000000
G01 X0.230000 Y1.840000 Z0.000000
G01 X0.230000 Y1.850000 Z0.000000
G01 X0.230000 Y1.860000 Z0.000000
G01 X0.230000 Y1.870000 Z0.000000
G01 X0.230000 Y1.880000 Z0.000000
G01 X0.230000 Y1.890000 Z0.000000
G01 X0.230000 Y1.900000 Z0.000000
G01 X0.230000 Y1.910000 Z0.000000
G01 X0.230000 Y1.920000 Z0.000000
G01 X0.230000 Y1.930000 Z0.000000
G01 X0.230000 Y1.940000 Z0.000000
G01 X0.230000 Y1.950000 Z0.000000
G01 X0.230000 Y1.960000 Z0.000000
G01 X0.230000 Y1.970000 Z0.000000
G01 X0.230000 Y1.980000 Z0.000000
G01 X0.230000 Y1.990000 Z0.000000
G01 X0.230000 Y2.000000 Z0.000000
G01 X0.230000 Y2.010000 Z0.000000
G01 X0.230000 Y2.020000 Z0.000000
G01 X0.230000 Y2.030000 Z0.000000
G01 X0.230000 Y2.040000 Z0.000000
G01 X0.230000 Y2.050000 Z0.000000
G01 X0.230000 Y2.060000 Z0.000000
G01 X0.230000 Y2.070000 Z0.000000
G01 X0.230000 Y2.080000 Z0.000000
G01 X0.230000 Y2.090000 Z0.000000
G01 X0.230000 Y2.100000 Z0.000000
G01 X0.230000 Y2.110000 Z0.000000
G01 X0.230000 Y2.120000 Z0.000000
G01 X0.230000 Y2.130000 Z0.000000
G01 X0.230000 Y2.140000 Z0.000000
G01 X0.230000 Y2.150000 Z0.000000
G01 X0.230000 Y2.160000 Z0.000000
G01 X0.230000 Y2.170000 Z0.000000
G01 X0.230000 Y2.180000 Z0.000000
G01 X0.230000 Y2.190000 Z0.000000
G01 X0.230000 Y2.200000 Z0.000000
G01 X0.230000 Y2.210000 Z0.000000
G01 X0.230000 Y2.220000 Z0.000000
G01 X0.230000 Y2.230000 Z0.000000
G01 X0.230000 Y2.240000 Z0.000000
G01 X0.230000 Y2.250000 Z0.000000
G01 X0.230000 Y2.260000 Z0.000000
G01 X0.230000 Y2.270000 Z0.000000
G01 X0.230000 Y2.280000 Z0.000000
G01 X0.230000 Y2.290000 Z0.000000
G01 X0.230000 Y2.300000 Z0.000000
G01 X0.230000 Y2.310000 Z0.000000
G01 X0.230000 Y2.320000 Z0.000000
G01 X0.230000 Y2.330000 Z0.000000
G01 X0.230000 Y2.340000 Z0.000000
G01 X0.230000 Y2.350000 Z0.000000
G01 X0.230000 Y2.360000 Z0.000000
G01 X0.230000 Y2.370000 Z0.000000
G01 X0.230000 Y2.380000 Z0.000000
G01 X0.230000 Y2.390000 Z0.000000
G01 X0.230000 Y2.400000 Z0.000000
G01 X0.230000 Y2.410000 Z0.000000
G01 X0.230000 Y2.420000 Z0.000000
G01 X0.230000 Y2.430000 Z0.000000
G01 X0.230000 Y2.440000 Z0.000000
G01 X0.230000 Y2.450000 Z0.000000
G01 X0.230000 Y2.460000 Z0.000000
G01 X0.230000 Y2.470000 Z0.000000
G01 X0.230000 Y2.480000 Z0.000000
G01 X0.230000 Y2.490000 Z0.000000
G01 X0.230000 Y2.500000 Z0.000000
G01 X0.230000 Y2.510000 Z0.000000
G01 X0.230000 Y2.520000 Z0.000000
G01 X0.230000 Y2.530000 Z0.000000
G01 X0.230000 Y2.540000 Z0.000000
G01 X0.230000 Y2.550000 Z0.000000
G01 X0.230000 Y2.560000 Z0.000000
G01 X0.230000 Y2.570000 Z0.000000
G01 X0.230000 Y2.580000 Z0.000000
G01 X0.230000 Y2.590000 Z0.000000
G01 X0.230000 Y2.600000 Z0.000000
G01 X0.230000 Y2.610000 Z0.000000
G01 X0.230000 Y2.620000 Z0.000000
G01 X0.230000 Y2.630000 Z0.000000
G01 X0.230000 Y2.640000 Z0.000000
...
...

ger21
09-17-2005, 02:46 PM
Sorry, I didn't see the attached file. :)

The problem is that you're in Demo mode. Those hundred lines of code just cut a 3/4" long straight line. I'm sure you're reaching the 100 line limit of the demo. If you paid for the software, you should have gotten a license file from Art which would let you run unlimited lines of code.

Bubba
09-17-2005, 04:27 PM
Seventeen,
First off, I use Turbocnc not Machx so my machine choked on the G40 code in line 1 (which is NOT recognized by TCNC). I removed the G40 and the file simulated satisfactorly.
Second, I don't think this is going to cut as Z=0?

Just my .02

Barker806
09-17-2005, 06:18 PM
The file ran great here.... I don't know what you have for settings...


The file looked very nice here
Brian