PDA

View Full Version : Need a quote for Waterjet and or Lazer Cutting.



Stampede
07-18-2011, 07:33 PM
I need a quote for 5, and 10 parts per each plate, or based on the size of the raw stock size.
For the top I will need a quote for 0.125" thick Stainless Steel and 0.125" Alum. Must be scratch(s) free.
For the bottom plate, it will need to be 5/8" thick alum. All the holes need to be put in. Just one question, how close can the holes be held? Also, must be able to except Pay Pal.

Stampede.

Stampede
08-07-2011, 08:54 PM
I just noticed that I had my old email address still active. If you had emailed me earlier, please resend quotes.

Thank you.

snovak240
08-08-2011, 09:45 PM
Looking at the plate with the inside cutout, there seems to be an extra circle on the bottom right of the cutout. Is that a mistake? Are these repeat parts or a one time order