PDA

View Full Version : Build log for my Prusa Mendel build



allenj20
07-08-2011, 01:53 PM
Hey All,

Here is the first entry in a build log for my Prusa Mendel.

HacksBot - Journal - 3D Printer Project*Log (http://www.hacksbot.com/journal/2011/7/8/3d-printer-project-log.html)

allenj20
07-11-2011, 12:57 PM
Hey all

Here is the second entry in my 3D printer build log.

HacksBot - Journal - 3D Printer Project Log Day*2 (http://www.hacksbot.com/journal/2011/7/11/3d-printer-project-log-day-2.html)

allenj20
07-13-2011, 04:09 PM
Hey All,

Here is the third entry in my Mendel Prusa build log.

Cheers, Allen

HacksBot - Journal - 3D Printer Project Log Day*3 (http://www.hacksbot.com/journal/2011/7/13/3d-printer-project-log-day-3.html)

allenj20
07-17-2011, 03:18 PM
Hey All,

Here is the fourth entry in my Mendel Prusa build log.

Cheers, Allen

HacksBot - Journal - 3D Printer Project Build Log Day*4 (http://www.hacksbot.com/journal/2011/7/17/3d-printer-project-build-log-day-4.html)

allenj20
07-19-2011, 02:45 PM
Hi All,

Here is the fifth entry in the Mendel Prusa 3D printer build log

HacksBot - Journal - 3D Printer Project Log Day*5 (http://www.hacksbot.com/journal/2011/7/19/3d-printer-project-log-day-5.html)

Cheers, Allen

Dean448
07-19-2011, 08:14 PM
Great build log.
I built a bootstrap Mendel last year and still learing ways to tune it.
How did you slave the two Z axis steppers when the ramps V1.3 shield has one Z driver?

allenj20
07-20-2011, 11:55 AM
Great build log.
I built a bootstrap Mendel last year and still learing ways to tune it.
How did you slave the two Z axis steppers when the ramps V1.3 shield has one Z driver?

Though it does have only one Z driver it has two slaved connectors to accommodate the Prusa design. Used to be you would wire them in parallel yourself now they actually accommodate the two connections on the RAMPS board.

allenj20
07-28-2011, 07:15 PM
Hi All,

Here is the payoff video for the Mendel Prusa 3D printer build project.

HacksBot - Journal - Hacksbot.com 3D Printer Build Log Printing*Payoff! (http://www.hacksbot.com/journal/2011/7/28/hacksbotcom-3d-printer-build-log-printing-payoff.html)

BackyardWorkshop
11-06-2011, 11:35 AM
Hi I wanted to check out your build but I don't see any pictures on your site? so just letting you know :)