PDA

View Full Version : Ballscrews with machined ends for CNC conversions



ngr1
09-09-2005, 02:47 PM
For anyone who is interested, you can buy 16mm (just shy of 5/8”) ballscrews with machined ends from
http://www.techno-isel.com/tech_linear.htm.
I have been looking for this option for sometime so this info may help others.

Many standard lengths to choose from, some rough pricing is as follows:

16mm OD with 10mm pitch, 16mm = .6299”
552mm = 21” = $74
752mm = 29” = $81
952mm = 37” = $91

Specs can be found here
http://www.techno-isel.com/LMC/H860/H860Cat.htm