PDA

View Full Version : New G540 controller



automationtechinc
05-19-2011, 11:21 AM
Hi all

As many requests from cnczone, we made this G540 controller Aluminun Case ( empty box )for sale

Pls see the link (It is on the bottom of page)


CNC Stepper Motor Control System, Keling Technology Inc, USA (http://www.kelinginc.net/ControlSystem.html)

See attached pictures

Crevice Reamer
05-19-2011, 11:32 AM
You have to scroll way down on the link to see this.

Very nice John! Looks like excellent value for the buck. I especially like the dual PSU options.

Thanks for taking care of us so well for so long.

CR.

Crevice Reamer
05-19-2011, 11:36 AM
Will you also be offering just the empty box for sale? Or maybe the box/estop combo?

CR.

automationtechinc
05-19-2011, 12:10 PM
Will you also be offering just the empty box for sale? Or maybe the box/estop combo?

CR.

Hi CR

We do sell the Aluminun Case ( empty box ) With E-Stop, Switch, Toggle Switch, Dual Power Supply outlet

Thank you for your support

It is on the bottom of page

CNC Stepper Motor Control System, Keling Technology Inc, USA (http://www.kelinginc.net/ControlSystem.html)

automationtechinc
06-02-2011, 10:02 AM
Hi all

As many requests from cnczone, we made this G540 controller Aluminun Case ( empty box )for sale

Pls see the link (It is on the bottom of page)


CNC Stepper Motor Control System, Keling Technology Inc, USA (http://www.kelinginc.net/ControlSystem.html)

See attached pictures


I got some email asking for the box size: 12"x 12" x 4"

Fastest1
10-30-2011, 11:28 PM
I just bought this case from you and it is a very nice little case. Below the actual area the G540 is installed, there are 2 other holes, 1 is for a USB cable (I thought this was for external power for limit switches etc). After further examination, Is this for a smoothstepper to be installed in the case also? the ribbon cable to pass thru the large slot and the USB to connect to my PC? I am not sure if I had ever read about anyone using a SS with a G540, though I see no reason not to.

dbc1218
12-12-2011, 04:24 PM
A few questions about this box:

Is the back panel where the g540 mounts removable?

What size fan will mount to the back? (I would assume that the keling 80mm fan would work)