View Full Version : Prototype 2D Cutout

05-01-2011, 07:05 PM
I need a single piece cut for a DIY project. The material is not especially important but I can't go more than ~3mm thick. SECC Steel, Aluminum, ABS, Polycarb, plexiglass, etc would all be acceptable. My primary concern is price, so whichever material gives the cheapest final product is what I'm looking for :)

The piece is a 180mm * 105mm plate with 29 holes of varying sizes/shapes cut out of it. Tolerance is +-.1mm

I've attached STL and DXF files, but here's a picture for reference:

05-03-2011, 05:05 PM
I might be able to help you, and make this part.
I already have many sheets of acrylic plexiglass laying around the shop,
so materials is of no concern.
I am having problems with the file you uploaded though.
If you haven't found someone to make this part for you yet,
then P.M. me and we can go through the details.

D&S Engineering

05-14-2011, 12:29 PM
in dxf viewer rotate the part- he has saved it as a side view