PDA

View Full Version : My first cut!



bonmotwang
04-29-2011, 06:53 PM
First cut on my first CNC machine. Result is pretty good. Power got cut off once in the middle, but recalibrated by hand.

Senna
04-29-2011, 11:14 PM
Wow.... two sided 3D machining as a first cut...! Bold move...! Looks terrific!

Senna

bonmotwang
04-29-2011, 11:54 PM
Thanks. Before this first cut I learned a lot from this forum. Very useful. Also cut3d is a good software. Next step is to see if I can adjust my CNC, because at x direction, it is a little curved. Maybe under $1000 cnc cannot do better.