View Full Version : Quote Request: Small, quick, easy & simply project

04-23-2011, 08:26 PM
I need a handful (literally) of small "fingernail sized" flat metal pieces cut with a roughly 1mm in diameter hole drilled in them. I have the "CAD" files already (in this case they are actually Solidworks files but i can save them in the format that you use before sending).

These are extremely simple designs / parts

* The small flat metal pieces need to range from 1.5mm to 2mm thick (2 different types)

* The part is roughly 7mm x 10mm x 1.5mm (and 2mm for the 2nd part)

* Stainless steel is the preferred material but i am open to aluminum (6061) or steel

* 16 parts are needed to begin with with many more (and additional larger items) needed after a successful implementation of these parts

* The parts have a small radius on the bottom end

Attached below is an example of a similar part. I do not need the rods to the left of the image and do not need the additional top hole as shown in the example pic (bottom hole only).

I have additional projects that are much more complex in design and larger in size but these need to be taken care of first.

I appreciate your time and look forward to responding to PM's .