PDA

View Full Version : Need Help! tree millennium 4200



alternativeamps
02-17-2011, 09:02 PM
would anyone have the builders message error file for this machine with anilam1400 control.
I bought this machine, and cannot get it to run without it, cant find it anywhere,,, """HELP"""" SOMEONE anyone,,,
:tired:

SES1
02-22-2011, 09:13 PM
On mine there are two switching type power supplies located on the main subpanel just behind the computer. I think the one you are interested in is located on the lower right corner of the subpanel. Mine has wire number 200 on a blue wire out the terminal strip. Be careful, I pretty sure this also has 120v AC on the same strip. I haven't verified this to be the 24v supply, but it seems most likely, and I expect the other one is the +/- 10v supply for the servo command. There is a glass fuse on the supply that I think is the 24v, I'd definitely check that.
Hope this helps. Have ya got any electrician buddies?