PDA

View Full Version : New Machine Build CNC Plasma Water Table Bladder Tank Question.



uvmetal
01-18-2011, 02:02 AM
Hi, I'm building a water table to go with my soon to arrive bulltear 4'x4' gantry kit. I'm considering using a 42 gallon plastic water tank for the air bladder water table drainage reservoir. Does anyone have any experience with this type of tank? I would lay it on its side with the 1 1/4" hose barb closest to the floor and have the air in and out on the top. The water table will have 3" walls with 2 1/2"- 2 3/4" of water in it.


Image of tank (http://cgi.ebay.com/ebaymotors/RV-camper-trailer-42-GALLON-FRESH-WATER-TANK-NEW-/350431756096?pt=Motors_RV_Trailer_Camper_Parts_Accessories&hash=item51975c3f40#ht_500wt_977)

Dustin407
01-22-2011, 04:50 PM
Yes, the plastic tank should work for you fine. My question is how are you going to attach the slats to the plastic without making potential leaks...?

uvmetal
01-24-2011, 12:15 PM
I'm welding a steel tube to the bottom of water tray, the hose clamping a vinyl tube to it and the tank. I'm just waiting for the gantry kit now.