PDA

View Full Version : HDPE Source?



Ezra
11-24-2010, 07:21 PM
Hello Everyone,

Im looking for a source to build my Joes 2006 Skin out of HDPE.

Any leads?



Thank You

Ezra
11-24-2010, 07:40 PM
High Density Polyethylene (HDPE) Sheeting | U.S. Plastic Corp. (http://www.usplastic.com/catalog/item.aspx?itemid=23869&clickid=redirect)

I hate finding some answeres after I post a question.

Ken_Shea
11-25-2010, 01:10 AM
+2 for US Plastics.
Good straight material also, purchased similar from Enco on two occasions, cut crooked, warped and twisted, for small parts that is not an issue but can be.

rbartko
01-12-2011, 04:49 PM
I fabricate molds using 1/2" and 3/4" HDPE and Polypropylene so I may have material. I am in the Austin, TX area

Rich Bartko
512-868-2862