PDA

View Full Version : Need Help! Maho MH800P regulator scheme needed BBC Axodyn 05LE10d-E



razor_amd
11-16-2010, 04:29 AM
Need electric scheme for MAHO's MH800p motor regulator board BBC Axodyn 05LE10d-E (GJR5 1064 00 R1 | 05 LE 10 d-E)

We can offer other schemes in exchange from various machines: MAHO, DECKEL, Micron and others.

Thanks in advance...

razor_amd
11-16-2010, 04:38 AM
Or if there is some experienced electronic to help us with our problem. When we start the motor by turning Potentiometer it starts but we cannot regulate its speed, it runs on same speed no matter how we turn the potentiometer and we cannot also shut it off with potentiometer turned to zero, the motor continues to run same speed. We need scheme to investigate where the problem is...

If someone can help we would be most grateful...

Thanks

razor_amd
11-19-2010, 05:07 AM
We found problem and have repaired the board... SOLVED!!!

belmarx
01-27-2012, 09:14 AM
┬┐WHAT ZONE OF THE BOARD REPAIRED? WE NEED A SAME PROBLEM

aliaghaei
11-28-2013, 04:04 AM
Dear razor_amd
I have maho MH800P, and i need electrical schematic for machine and for BBC Axodyn 05LE10d-E (GJR5 1064 00 R1 | 05 LE 10 d-E).
can you help me?

Ram0n
05-01-2015, 12:44 PM
Hello, i have got the same Problem with the bbc axodyn 05 LE 10 c-E.
I Can't regulate the speed with the potentiometer. The motor runs always with the same speed. The potentiometer is not defective.
Could anyone help me with my problem ?

SKENEY
07-01-2016, 06:57 AM
Hello All, I have a MH700P with the same drive, I need the schematic of this drive if someone has it? Thank you