PDA

View Full Version : getting to grips witha HY-TB3DV-M driver board



orchardtim
11-10-2010, 08:21 AM
hi ,I'm totally new to diy cnc building ,so any help would be gratefully received.First on my list is wiring diagrams for the abve driver board.I bought the board from e-bay and the info that came with it is a bit laking .I think the e-stop and limit switch connector is xh 2.5 pitch 5way,if anyone can confirm this that would be great start.And some kind diagram to connect e-stop and limit switches .

matrhint
03-05-2011, 06:01 PM
hi ,I'm totally new to diy cnc building ,so any help would be gratefully received.First on my list is wiring diagrams for the abve driver board.I bought the board from e-bay and the info that came with it is a bit laking .I think the e-stop and limit switch connector is xh 2.5 pitch 5way,if anyone can confirm this that would be great start.And some kind diagram to connect e-stop and limit switches .
I think they cover that in this thread:
http://www.cnczone.com/forums/stepper_motors_drives/110210-tb6560_hy-tb3dv-m_limit_switch_connector.html