PDA

View Full Version : Need Help! Wire saw machine



GAGRO
11-03-2010, 02:34 PM
I'm looking for machine who could cut irregular stone, irregular stone surface, I attached some images to show You what kind of lines should be cut. As you can se lines are not straight, they are irregular. Table size would be around 500mm x 500mm. So i was thinking that the best machine for this would be some wire saw machine, am i right?? If i'm not, which is the best? And where i can find it on internet to buy????

packrat
11-03-2010, 07:01 PM
How about some thing like this; Diamond Saw Acessories (http://www.diamond-drill-bit-and-tool.com/Diamond-Drill/Taurus-Ring-Saw.shtml)

Google, diamond band saw , For more.

cary

GAGRO
11-07-2010, 05:45 AM
I'm also find this when I start to search for some machines, but I wasn't sure this machine could cut very smal iregular lines of stone??? What You think? I can't find thinckess of this ring saw, i need thinckess from 1-5 mm.

packrat
11-07-2010, 06:39 PM
Your best bet is to E-mail the company and ask them.

cary

joumpy
11-20-2010, 06:17 PM
How about using a CNC milling machine with a diamond tool of small diameter?
Say Ø2 mm for example.