PDA

View Full Version : DMU 70V



Bromy
10-20-2010, 01:58 PM
Very new to these machines, I need to drill a angled hole at 45 degrees (looking down the Y axis) what angles do I need to spin the table to in the B and C axis to achieve the 45 degrees, control is Heid 426.

Thanks

bmartin
11-23-2010, 03:16 PM
Very new to these machines, I need to drill a angled hole at 45 degrees (looking down the Y axis) what angles do I need to spin the table to in the B and C axis to achieve the 45 degrees, control is Heid 426.

Thanks

I can't help you, but came here looking along the lines for the same thing. I'm trying to find a calculator for figuring out different angles for this same machine.