PDA

View Full Version : MAHO MH 600C, CNC532 without manual



PaulieTheKid
10-16-2010, 02:52 PM
Hi,

I'm able to buy a 1993 MAHO MH 600 C with rotary table, B-axis.
It has Heidenhain cnc 532 control. The machine is used but still in good shape I suppose.

The problem is that the machinetrader doesn't have the control manual (cnc 532) with it. I've done some milling on a 400E with Philips cnc 432 a little while ago, but never used the 532 control before.

Does anybody around here have a digital copy of the manual for me. It would be verry useful since I'm not able to fully test the machine before buying it. I don't know how to turn the vertical milling head away by programm for horizontal milling and I don't know how to change tools in vertical and horizontal mode.

The machinetrader is asking 16500 euro's for it. That's a little bit to much in my opinion for a 17 year old machine without complete documentation.
It would be a real nightmare if I bought a "problem" machine.

Thanks,

Paul from The Netherlands

mszelong
12-07-2010, 03:33 AM
Hi Paul,

Also looking for the NC532 programming manual, were you able to find one? Friend has a Maho MH 1200C we are trying to get up and running...

Thanks,

Mike

PaulieTheKid
12-07-2010, 03:59 AM
Hi Mike,

Nope, haven't found anything yet.